BePro "Nouveau"

!

 

!
Favero Electronics Srl

Favero Assioma Duo Power Meter

Power meter with sensors on both pedals. The best choice to take full advantage of the real dual-sided measurement.

 

Overview:

Easy to install
Install and transfer your Assioma power meter from one bike to another just like normal pedals, easily and without extra tools. Just screw them on your bike crank arms and you are ready to pedal!

• Bluetooth and ANT+ SMART
Assioma communicates via Bluetooth and ANT+ with bike computers and smartphones, both Android and iOS.

• Real dual-sided power data
Assioma DUO provides dual-sided data through real measurements: taken individually on both the left and the right leg; this make it possible to observe with accuracy not only the Total Power, but also the L/R Balance, the Torque Effectiveness (TE), the Pedal Smoothness (PS), etc.

• Accuracy and consistency
Assioma provides accurate watt measurements with a great consistency and stability in the actual on-road use conditions and at any temperature between -10°C and 60°C.

• Waterproof, resistant and light
Assioma is the lightest pedal-based power meter. Thanks to its compact design, it never interferes with the pedaling: not even when cornering. The power sensors are protected in a bi-component resin block, extremely resistant to shocks and completely waterproof.

• Rechargeable and green
Assioma is the only pedal-based power meter with integrated rechargeable batteries; a single charge ensures 50 hours of use at least.

• Tested and guaranteed
Favero Electronics produces in-house each Assioma and thoroughly test it individually: fully satisfying the standards required by current regulations.

Technical characteristics:

• Power sensor on both pedals
• Dual-sided power measurement
• Cadence sensor: included, inbuilt
• Total weight per pedal: 149,5 g (battery included)
• Battery type: rechargeable lithium battery
• Battery life: at least 50 hours
• Radio communication: Bluetooth v4.0, ANT+ PWR profile (CT + PO)
• Accuracy power measurement: ± 2%
• Temperature compensation: -10°C / +60°C
• Water resistance degree: IP67
• Q-factor: 54mm
• Firmware updates via Bluetooth with Favero Assioma App
• Compatible cleats: Original LOOK Kéo and Favero cleats (red and black)
• Bike type: racing/road
• Designed and produced in Italy
• Warranty: 2 years

Package content:

• Left pedal with power sensor
• Right pedal with power sensor
• Battery charger including plugs (EU, US, UK, AU)
• 2 two-meter long micro-USB/USB cables with 2 magnetic connectors
• 2 red cleats float 6° (LOOK Kéo compatible)
• Hex key and 4 washers for the installation
• User manual

Favero Electronics Srl

bePRO (Power meter avec 2 Powersensoren / Dual)

Bonne Affaire

Prix public: € 749

  • Au Powermetershop eu : € ...
  • Pas de frais d’expédition, de paiement ou d’administration pour les commandes dépassant les € 60

Questions? Moins cher ailleurs? info@TrainRight.eu

In many ways, the bePRO power meter is the little unknown underdog that snuck onto the scene earlier this summer with a very simple declaration: We’re here, we’re new, we’re cheap, and we’ve already started shipping. How ‘bout them apples?

The unit retails for €749EUR globally, with the local price simply based on the current exchange rate.    Note that this is for the dual-leg system (two pedals).  Whereas they also make the bePRO S version, which is a single pedal for 499EUR.  For this review, I’m reviewing the dual-system.  The single leg system simply doubles the left-leg power, but otherwise works identically.

DC Rainmaker remarks....... click here  

De bePRO (vermogensmeter met 2 Powersensoren / Dual) direct geintegreerd in de beide pedalen. Hierdoor meet de bePRO de kracht exact daar waar het wordt uitgeoefend en dit voor elke pedaal apart.

bePRO is uiterst geschikt om het effect van jouw trainingen op een hoger niveau te brengen. Tevens is de balans tussen het linker been en het rechter been direct zichtbaar.

IMPROVED PERFORMANCE BALANCE DOOR CONTROLCONTROL

Dankzij de dubbele sensoren meet de bePRO het krachtsverschil tussen het linker en het rechter been. Hierdoor heb je inzicht in de li/re balans en kun je jouw positie op het zadel en krachten beter verdelen.

VEDERLICHT

Het toegevoegde gewicht van de sensoren van bePRO bedraagt slechts 16 g, hierdoor is de powermeter extreem licht en weegt totaal slechts 150gram per pedaal.

OPLAADBAAR

De powermeter is altijd klaar voor gebruik dankzij de oplaadbare lithium-ion batterij die een gebruiksduur heeft van ca. 30 uur, onafhankelijk van de soort rit.

BETROUWBAAR

Bewezen betrouwbaarheid onder extreme condities. De pedalen hebben de bePRO test, met rigoureuze kwaliteitstest, onder allerlei weersomstandigheden, water, temperatuur en vochtigheidstests, ruimschoots doorstaan.

COMPATIBEL

  • Door de ANT+ technology is de bePRO compatibel met de beste fietscomputers. De powermeterssoftware garandeert betrouwbare data transmissie van de vermogensmeter naar tal van (ANT+) toestellen.

EENVOUDIG TE INSTALLEREN

  • Eenvoudig te installeren binnen slechts een aantal minuten. Geen ondersteuning nodig van een een fietsenmaker of mecanicien.

ACCURAAT

  • Voorzien van geavanceerde techniek de bePRO voorziet de rijder van betrouwbare powerinformatie onder alle omstandigheden, met een foutmarge van slechts 2%.

SPECIFICATIES

  • Batterij: lythium batterij, oplaadbaar
  • Gebruiksduur: ca. 30 uur
  • Totaal gewicht per pedaal: 150 gr.
  • Sensor gewicht: 16 gr.
  • Pedaal gewicht: 134 gr.
  • Radio signaal cq protocol: ANT+ 2,4 GHz
  • Minimum – maximum power: 0-2000 W
  • Balans l/r: 0-100%
  • Minimum – maximum cadence: 30-180 rpm
  • Nauwkeurigheid Power meting: 2%
  • Min max gebruiks temperatuur: -10/+60°C
  • Water proof: IPX7
  • Maximum pedal load weestrand: 90kg.
  • Reference Regulation: EN14038, EN60950

LEVEROMVANG

  • Linker pedaal met sensor bePRO
  • Rechter pedaal met sensor bePRO
  • Schoenplaatjes float 6°
  • Oplader met 2 kabels van 2 M.
  • Set van 4 uitlijn labels
  • Montage toolkit
  • Gebruiksaanwijzing
Favero Electronics Srl

Favero Assioma Uno Power Meter

Cycling power meter with power sensor on the left pedal. The single-sided power meter pedals with upgrade option.

Overview:

Easy to install
Install and transfer your Assioma from one bike to another just like normal pedals, easily and without extra tools. Just screw them on your bike crank arms and you are ready to pedal!

Bluetooth and ANT+ SMART
Assioma communicates via Bluetooth and ANT+ with bike computers and smartphones, both Android and iOS.

Accuracy and consistency
Assioma provides accurate watt measurements with a great consistency and stability in the actual on-road use conditions, and at any temperature between -10°C and 60°C.

Waterproof, resistant and light
Assioma is the lightest pedal-based power meter ever made. Thanks to its compact design, it never interferes with the pedaling. Not even when cornering. The power sensors are protected in a bi-component resin block, extremely resistant to shocks and completely waterproof.

Rechargeable and green
Assioma is the only pedal-based power meter with integrated rechargeable batteries; a single charge ensures 50 hours of use at least.

Tested and guaranteed
Favero Electronics produces in-house each Assioma and thoroughly test it individually: fully satisfying the standards required by current regulations.

Technical characteristics:

• Power sensor on the left pedal
• Cadence sensor: included, inbuilt
• Total weight per pedal: 149,5 g (battery included)
• Battery type: rechargeable lithium battery
• Battery life: at least 50 hours
• Radio communication: Bluetooth v4.0, ANT+ PWR profile (CT + PO)
• Accuracy power measurement: ± 2%
• Temperature compensation: -10°C / +60°C
• Water resistance degree: IP67
• Q-factor: 54mm
• Hardware upgrade to Assioma DUO always available
• Firmware updates via Bluetooth with Favero Assioma App
• Compatible cleats: Original LOOK Kéo and Favero cleats (red and black)
• Bike type: racing/road
• Designed and produced in Italy
• Warranty: 2 years

Package content:

• Left pedal with power sensor
• Right pedal without power sensor
• Battery charger including plugs (EU, US, UK, AU)
• 1 two-meter long micro-USB/USB cable with magnetic connector
• 2 red cleats float 6° (LOOK Kéo compatible)
• Hex key and 4 washers for the installation
• User manual

Favero Electronics Srl

bePRO S (Vermogensmeter met Powersensor / Single)

Promo - 5 %

Prix public: € 499

  • Au Powermetershop eu : € 485
  • Pas de frais d’expédition, de paiement ou d’administration pour les commandes dépassant les € 60

Questions? Moins cher ailleurs? info@TrainRight.eu

In many ways, the bePRO power meter is the little unknown underdog that snuck onto the scene earlier this summer with a very simple declaration: We’re here, we’re new, we’re cheap, and we’ve already started shipping. How ‘bout them apples?

The unit retails for €749 globally, with the local price simply based on the current exchange rate.    Note that this is for the dual-leg system (two pedals).  Whereas they also make the bePRO S version, which is a single pedal for € 499.  For this review, I’m reviewing the dual-system.  The single leg system simply doubles the left-leg power, but otherwise works identically.

DC Rainmaker remarks....... click here 

 
BICYCLE POWER METER WITH A SINGLE POWER SENSORS.
Integrated in only one pedal, bePRO S measures the force applied on the left pedal and provides an estimation of the total power exerted by both legs. Cyclists who wish to have top power measuring can buy the right pedal separately at a later time.
 
THE PERFECT SOLUTION FOR THE AMATEUR CYCLIST
Using the same cutting-edge technology as the double-sensor bePRO, bePRO S is a perfect solution for amateur cyclists who want to improve their cycling training with a professional bicycle power meter.
 
Light
The use of high tech content and cutting-edge materials, the weight of the bePRO sensor is only 16 g, makes the powemeter extremely light, total weight of each pedal is only 150 g.
 
Rechargeable
Your power meter is always ready for use. Its rechargeable lithium-ion batteries have a 30-hour life, regardless of whether you are racing or training.
 
Reliable
Reliable even in extreme conditions as proved by the rigorous quality tests successfully passed by bePRO: impact, drop, wear, water, temperature and humidity tests.
 
Compatible
Thanks to the ANT+ technology, bePRO is compatible with the best cycling computers available on the market. The power meter software ensures reliable data transmission from the power meter to any commercially available device.
 
Easy to install
You can install your pedal power meter on your bicycle by yourself in just a few minutes, without the assistance of a mechanic, without needing to modify the transmission, remove the wheels, or install external sensors.
 
Accurate
Provided with an advanced compensation system, bePRO can take accurate and reliable measures in any environmental condition, with a margin of error of only 2%.
 
Specifications
  • Battery: lythium battery, rechargeable
  • Authonomy: About 30 hours
  • Total weight of the pedal: 150 gr.
  • Sensor weight: 16 gr.
  • Pedal weight: 134 gr.
  • Radio transmission protocol: ANT+ 2,4 GHz
  • Minimum – maximum power: 0-2000 W
  • Balance l/r: 0-100%
  • Minimum – maximum cadence: 30-180 rpm
  • Power measurement accuracy: 2%
  • Min max operation temperature: -10/+60°C
  • Water resistance: IPX7
  • Suggested athlete wheight: up to 120kg
  • Reference Regulation: EN14038, EN60950
 
Package contents
  • Left pedal with sensor bePRO
  • Right pedal without sensor
  • Couple of red cleats float 6°
  • Battery charger including 2 cables lenght 2,0 mt
  • Set of 4 allignment labels
  • Assembling toolkit
  • Users manual

 

Favero Electronics Srl

BePro Assembly Tools

Complete assembly set for the bePRO pedal composed of keys, pins and template.
Favero Electronics Srl

BePro 4 Alignement Label Kit

Set of 4 self-adhesive labes for allignment of the bePRO pedal with powermeter.
Favero Electronics Srl
bepro usb_cover deck caps powermetershop eu _ trainright eu

BePro Micro-USB cups

Set of 4 caps for the micro USB port of the bePRO powermeter.
Favero Electronics Srl
bepro black cleats (0° float) powermetershop eu _ trainright eu

BePro Black Cleats (0° Float)

Couple of black cleats LOOK KéO type, float 0°, for bePRO pedals.

Screws for fastening to the shoes included.

Favero Electronics Srl

BePro Red Cleats (6° Float)