| Type de périphérique |
Caméra casque |
| Caméra |
Couleur 420 lignes TV (PAL 500x582 pixels) |
| Type de capteur optique |
Capteur CCD Sharp 1/3" |
| Interfaces |
Analogue |
| Prise en charge audio |
Microphone intégré |
| Câbles inclus |
1 x 3.5mm mini-din + 1 x RCA |
| Accessoires inclus |
Pack batterie 8 x AA (piles non incluses), 3 adapteurs casque, bandeaux et grips |
| Capteur |
CCD Sharp 1/3" |
| Sensibilité |
0.5 Lux |
| Lentille |
3.6mm, F2.0, focus fixe, angle 92% |
| Protection |
anti-rayure en extérieur, anti-buée en intérieur |
| Résolution |
420 lignes TV (PAL 500x582 pixels) |
| Balance des blancs |
automatique |
| Contrôle de gain |
automatique |
| Exposition |
automatique |
| Contrôle contre-jour |
automatique |
| Entrée audio |
Microphone intégré |
| Sortie audio/vidéo |
Analogique |
| Câbles |
3.5mm mini-din ou connecteur RCA pour raccordement à l'enregistreur |
| Entrée |
DC 12v (8 piles AA R6) |
| Consommation |
100mA |
| Autonomie (moyenne) |
14 heures |
| Poids net |
150 gr |
| Poids avec pack batteries |
295 gr |
| Composition |
Polyurethane (TPU) et ABS, conforme aux normes européennes RoHS |
| Plage de températures |
-10 à +50 degrés Celsius |
| Résistant à l'eau |
oui |
| Etanche |
non |
- Winner of the Eurobike Award 2006 (Innovation product 2006)
- Winner of the ISPO brandnew award 2007
- THREE DIFFERENT SIZE adaptors make the BLACKEYE™ fit tightly on virtually any helmet. The shape of the adaptors has been computer-developed in order to provide the perfect fit.
The adaptors are designed to GRAB THE HELMET TIGHT ON ITS FRONT RIDGE. Tightening the head strap keeps the camera from moving or slipping off the helmet.
- ERGONOMIC SHAPE FOR YOUR FOREHEAD. The inside of the BLACKEYE™ is designed in an extremely complex 3-dimensional shape, with one goal only: To fit your nugget perfectly. This is in case you want to use BLACKEYE™ in sports and activities where helmets are not needed. You'll like the snug fit.
- HELMET STYLES vary. The front angle can vary from steep to sloped, depending on the type of helmet and the manufacturer. The three different size BLACKEYE™ helmet adaptors take care of this fact and make the camera fit all shapes (with some rare exceptions). The right fit ensures that the camera is pointing in the right direction.
- Everyone has a unique way in holding his head and wearing a helmet. In order to find the perfect forward facing fit of your BLACKEYE™ you simply have to choose the right adaptor and adjust your helmet accordingly. Sometimes moving the helmet a couple of degrees forward or backward will just do the trick. Once you found your fit you're ready to roll.
ERGONOMIC SHAPE FOR YOUR FOREHEAD. The inside of the BLACKEYE™ is designed in an extremely complex 3-dimensional shape, with one goal only: To fit your nugget perfectly. This is in case you want to use BLACKEYE™ in sports and activities where helmets are not needed. You'll like the snug fit.
Optics/Electronics:
- Sensor Chip: SHARP 1/3 inch CCD
- Resolution: 420 TVL, (510x492 Pixel NTSC Version) (500x582 PAL Version)
- Sensitivity: 0.5 Lux
- Operating Temperature: -10?Celsius to + 50?Celsius
- Lens Angle: 92? Degree, 3.6mm, F2.0 fixed focus
- Signal/Noise Ratio: 48dB
- 12 Volt power supply (8AA batteries)
- Power Consumption: approx. 100mA
- Battery Life: Up to 14 hours
- Integrated microphone
- Auto White Balance (AWB)
- Back light Compensation with Window Weight (BLC)
- Auto Gain Control (AGC)
- Auto Exposure (AE), no Aperture Control (APC)
- Output: Analog Audio/Video Signal,
- Interface to Recording Device: 3.5mm mini plug or 3 RCA connectors
Main Body:
- Weight Head/Helmet Unit: 150gr.
- Weight Battery Pack including 8AA Batteries: 295gr.
- Material: Polyurethane (TPU) and ABS, RoHS compliant
- Protection Lens: Anti-Scratch-Coating outside, Anti-Fog-Coating inside
- Water Resistent
- Developed in the USA, Manufactured in CHINA
